R&S SGT100A User Manual page 71

®
R&S SGT100A
The "Configure Instruments" dialog opens. The list of configured instruments is
empty.
3. Select "Configure Instruments > Scan".
The software scans the network for connected and active instruments.
Alternatively, use the "New" function to add the R&S SGT manually to the list of
instruments.
4. Close the dialog.
5. In the block diagram, select "Vector Sig Gen" block and select the R&S SGT form
the list.
6. In the block diagram, select "Arb Sig Gen" block and select the R&S SGT form the
list.
User Manual 1176.8674.02 ─ 07
How to Create a Waveform File with R&S WinIQSIM2 and Load it in the ARB
First Steps with the Instrument
40