R&S SGT100A User Manual page 343

®
R&S SGT100A
Example:
Usage:
:CALibration:ALL[:MEASure]?
Starts all internal adjustments for which no external measuring equipment is required.
Return values:
<All>
Usage:
Manual operation:
:CALibration:FREQuency[:MEASure]?
Performs all adjustments which affect the frequency.
Return values:
<Synthesis>
Usage:
Manual operation:
:CALibration:IQModulator:FULL?
Starts the adjustment of the I/Q modulator for the entire frequency range. The I/Q mod-
ulator is adjusted with respect to carrier leakage, I/Q imbalance and quadrature.
Return values:
<Modulator>
Usage:
Manual operation:
:CALibration:IQModulator:LOCal?
Starts the adjustment of the I/Q modulator for the current frequency. The I/Q modulator
is adjusted with respect to carrier leakage, I/Q imbalance and quadrature.
This adjustment is only possible when :OUTPut[:STATe] ON and
[:SOURce]:IQ:STATe ON.
Return values:
<CFRequency>
Usage:
Manual operation:
User Manual 1176.8674.02 ─ 07
CAL:BBIN:MEAS?
starts the adjustment of the analog I/Q input.
Response: 0
adjustment has been performed successfully.
Query only
0 | 1 | OFF | ON
Query only
See "Adjust All" on page 244
0 | 1 | OFF | ON
Query only
See "Synthesis" on page 244
0 | 1 | OFF | ON
Query only
See "I/Q Modulator" on page 245
0 | 1
Query only
See "Adjust I/Q Modulator at Current Frequency"
Remote Control Commands
CALibration Subsystem
on page 244
312