Multi-Carrier Waveforms - R&S SGT100A User Manual

®
R&S SGT100A
Append
Inserts a new row at the end of the sequencing play list table.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend
Delete
Deletes the selected row.
Remote command:
n.a.
Shift Id# Up/Down
Shifts the selected row up and down.
Remote command:
n.a.
Sequencing Graphic
Displays the play list graph according to the current configuration.
The graph shows the segment sequence, the segment number and the number of
times, the segment is repeated; considered are only the active segments.
Remote command:
n.a.
New Sequencing List
Opens the "Select Sequencing List" dialog to enter the name of the new file.
Remote command:
n.a.
Load Sequencing List
Opens the "Select Sequencing List" dialog to select an existing play list file.
Remote command:
n.a.
Save Sequencing List
Saves the current entries of the table in a play list file.
The default filename of the play list file is the same as the multi segment waveform file-
name, but it can be changed.
Play list files have the file extension *.wvs.
Remote command:
n.a.
7.1.2.4

Multi-Carrier Waveforms

Multi-carrier waveforms consisting of up to 512 carriers modulated by user-selectable
baseband signals can be created to simulate complex multi-carrier scenarios with dif-
ferent baseband signals (e.g. CDMA2000 or 3GPP FDD).
User Manual 1176.8674.02 ─ 07
Signal Generator Settings
Baseband
on page 400
on page 399
93