R&S SGT100A User Manual page 482

®
R&S SGT100A
Setting parameters:
<Filename>
Usage:
Manual operation:
[:SOURce<hw>]:IQ:DPD:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension *.dpd.
Setting parameters:
<Filename>
Usage:
Manual operation:
[:SOURce<hw>]:IQ:DPD:SETTing:STORe <Filename>
Stores the current settings into the selected file; the file extension (*.dpd) is assigned
automatically.
Setting parameters:
<Filename>
Usage:
Manual operation:
[:SOURce<hw>]:IQ:DPD:AMAM:STATe <State>
[:SOURce<hw>]:IQ:DPD:AMPM:STATe <State>
Enabels/disables the AM/AM and AM/PM digital predistortion.
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:IQ:DPD:AMFirst <AmAmFirstState>
Sets that the AM/AM predistortion is applied before the AM/PM.
User Manual 1176.8674.02 ─ 07
"<filename>"
Filename or complete file path
Setting only
See "Save/Recall" on page 186
"<filename>"
Filename or complete file path
Setting only
See "Save/Recall" on page 186
"<filename>"
Filename or complete file path
Setting only
See "Save/Recall" on page 186
0 | 1 | OFF | ON
*RST: 0
See Example "Defining correction coefficients and enabling digi-
tal predistortion" on page 447
See "AM/AM and AM/PM State"
Remote Control Commands
SOURce Subsystem
on page 187
451