Source:bb:impairment Subsystem; [:Source<Hw>]:Bbin:state - R&S SGT100A User Manual

®
R&S SGT100A
Note: With a connected R&S EX-IQ-Box either the internal clock source (User
defined) or an external clock (Digital I/Q In) can be selected in the settings dialog of the
R&S EX-IQ-Box. Therefore, the sample rate source is only indicated in this field.
Parameters:
<Source>
Example:
Manual operation:
[:SOURce<hw>]:BBIN:STATe <State>
This command switches the feeding of an external analog signal into the signal path
on/off.
Parameters:
<State>
Example:
Manual operation:

11.14.6 SOURce:BB:IMPairment Subsystem

This subsystem contains the commands for the digital I/Q impairments.
[:SOURce<hw>]:BB:IMPairment:DELay
[:SOURce<hw>]:BB:IMPairment:IQRatio[:MAGNitude]
[:SOURce<hw>]:BB:IMPairment:LEAKage:I
[:SOURce<hw>]:BB:IMPairment:LEAKage:Q
[:SOURce<hw>]:BB:IMPairment:QUADrature[:ANGLe]
[:SOURce<hw>]:BB:IMPairment:SKEW
[:SOURce<hw>]:BB:IMPairment:STATe
[:SOURce<hw>]:BB:IMPairment:OPTimization:MODE
[:SOURce<hw>]:BB:IMPairment:OPTimization:STATe
[:SOURce]:BB:IMPairment:IQOutput<ch>:STATe
[:SOURce]:BB:IMPairment:IQOutput<ch>:DELay
[:SOURce]:BB:IMPairment:IQOutput<ch>:QUADrature[:ANGLe]
[:SOURce]:BB:IMPairment:IQOutput<ch>:IQRatio[:MAGNitude]
[:SOURce]:BB:IMPairment:IQOutput<ch>:SKEW
User Manual 1176.8674.02 ─ 07
USER | DIN
*RST: USER
BBIN:SRAT:SOUR
queries the sample rate mode of the external digital baseband
signal.
See "Sample Rate Source"
0 | 1 | OFF | ON
*RST: 0
BBIN:SOUR ANAL
selects an external analog signal as the input signal. The signal
must be applied at the inputs I and Q.
BBIN:STAT ON
switches on the Baseband In block. The external analog signal
is A/D-converted and fed into the digital signal.
See "State" on page 238
............................................................................408
......................................................................408
.................................................................... 409
............................................................................409
........................................................................... 410
..............................................................411
.............................................................. 411
.............................................................. 412
Remote Control Commands
SOURce Subsystem
on page 239
.......................................................408
...................................................... 409
....................................................... 410
.......................................................410
.........................................411
..........................................412
407