Filling The Correction List Automatically - R&S SGT100A User Manual

®
R&S SGT100A
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:MODE
Extension
Selects the file extension of the ASCII file to be imported or exported. Selection "TXT"
(text file) or "CSV" (Excel file) is available.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension
Decimal Point
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 419
Column Separator
Selects the separator between the frequency and level column of the ASCII table the
user correction list is exported to or imported from.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 419
Select ASCII Source/Destination
Calls the "File Manager" for selecting the ASCII file to be imported into a user correc-
tion list (source) or the ASCII file the user correction list is exported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect
Select Destination/Source
Calls the "File Manager" for selecting the user correction list to be exported (source)
into an ASCII file or the destination for the ASCII file to be imported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:SELect
Import/Export
Starts the export or import of the selected file.
When import is selected, the ASCII file is imported as user correction list.
When export is selected, the user correction list is exported into the selected ASCII file.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:EXECute
7.7.6.6

Filling the Correction List Automatically

The "Fill Table" menu enables you to set the level correction values automatically.
User Manual 1176.8674.02 ─ 07
Signal Generator Settings
RF Settings
on page 420
on page 418
on page 418
on page 421
on page 420
216