R&S SGT100A User Manual page 517

®
R&S SGT100A
Setting parameters:
<Key>
Example:
:SYSTem:DATE <Year>, <Month>, <Day>
Queries or sets the date for the instrument-internal calendar.
This parameter is protected, in order to prevent accidental changes.
It can be accessed with protection level 1, see
on page 485.
Parameters:
<Year>
<Month>
<Day>
Example:
Manual operation:
:SYSTem:TIME <Hour>, <Minute>, <Second>
Queries or sets the time for the instrument-internal clock.
The parameter is protected, in order to prevent accidental changes.
It can be accessed with protection level 1, see
on page 485.
Parameters:
<Hour>
User Manual 1176.8674.02 ─ 07
integer
The respective functions are disabled when the protection level
is activated. No password is required for activation. A password
must be entered to deactivate the protection level. The pass-
word for the first level is 123456.
This protection level can be used to lock-out internal adjust-
ments.
SYSTem:PROTect1:STATe ON
activates protection level 1. Internal adjustments are only possi-
ble after deactivating the lock-out.
SYSTem:PROTect1:STATe OFF,123456
deactivates protection level 1. Internal adjustments are enabled
again.
<year>,<month>,<day>
integer
Range: 1 to 12
integer
Range: 1 to 31
SYST:DATE?
Response: "2011,05,01"
it is the 1st of May, 2011.
See "Date" on page 261
0...23,0...59,0...59
Range: 0 to 23
Remote Control Commands
SYSTem Subsystem
:SYSTem:PROTect<ch>[:STATe]
:SYSTem:PROTect<ch>[:STATe]
486