How To Use Computer Names; How To Install A New Firmware Version On The Instrument - R&S SGT100A User Manual

®
R&S SGT100A
For description on how to terminate work and shut down the instrument regularly, refer
to Chapter 2.1.5, "Switching the Instrument On and

9.8 How to Use Computer Names

If there is a name server in the network, alternatively to the IP address each PC or
instrument connected in a LAN can be accessed via an unambiguous computer name.
Each instrument is delivered with an assigned computer name, but this name can be
changed.
For instruction on how to find out the default computer name, refer to
"Finding Out the Default Hostname of the
To query and change a computer name
To avoid violations and to make use of the easy identification provided by the computer
name, it is recommended to keep the default hostname unchanged.
1. Open "SGMA-GUI > Instrument Name > Setup > Network Settings" dialog.
The computer name is displayed under "Hostname".
2. Select "SGMA-GUI > Instrument Name > Setup > Protection" and enable the "Pro-
tection Level 1".
The parameter "Hostname" in the "Network Settings" dialog is now enabled for
configuration.
3. Change the "Hostname".
4. Press the POWER ON/STAND BY key to restart the instrument.
Note: The "Factory Preset" function restores the factory value of the parameter
"Hostname".
9.9 How to Install a New Firmware Version on the Instru-
ment
You can update the firmware of the R&S SGT .
User Manual 1176.8674.02 ─ 07

How to Install a New Firmware Version on the Instrument

Instrument",
Performing Configuration Tasks
Off", on page 21.
Chapter 6.5.3,
on page 65.
272