R&S SGT100A User Manual page 118

®
R&S SGT100A
Comment
Adds a comment to the multi segment file.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:COMMent
Output file
Opens the File menu, where the filename of the multi segment waveform which has to
be calculated can be entered. The multi segment waveform is saved under this name
by clicking the "Create" or "Create and Load" button.
A name must also be entered here before the list can be saved as a configuration file
("Save List"). In this case, the name is needed for internal storage procedures. It is
entered as the default name for the multi segment waveform file when loading the list.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:OFILe
Segment Table
► To access this dialog, select "SGMA-GUI > Instrument Name > Baseband > ARB >
Multi Segment.. > Segment Table".
This dialog comprises the settings for creating and adjusting the contents of the
multi segment file.
Multi Segment Table
The table lists the individual waveforms (segments) of the selected multi segment
waveform. The information about the segments is taken from the tags of the corre-
sponding waveform files.
"Segment#"
"Filename"
User Manual 1176.8674.02 ─ 07
Indication of segment index. The segment index is used to select the
segment to be output.
The segment index also defines the sequence of the output during
triggering in the "Next Segment" or "Next Segment Seamless".
Indication of the waveform filename of the segment.
Signal Generator Settings
Baseband
on page 393
on page 395
87