R&S SGT100A User Manual page 246

®
R&S SGT100A
"Insert Range"
"Insert Row"
"Fill...."
"Fill with sensor..."
"Delete Row"
"Delete Range..."
"Save as"
"Save"
Remote command:
[:SOURce<hw>]:CORRection:CSET[:SELect]
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency
[:SOURce<hw>]:CORRection:CSET:DATA:POWer
Import/Export >>>
Expands the menu with the area for import and export of user correction files.
Externally edited Excel tables with any number of frequency/level value pairs can be
imported as text or *.csv files and used for user correction.
Conversely, you can also export internally created user correction lists as text or
*.csv files.
Mode - User Correction
Selects if user correction lists should be imported or exported. The settings offered
depend on the selected mode.
User Manual 1176.8674.02 ─ 07
Insert new rows before the marked row. The number of rows to be
inserted can be defined in an entry window.
Insert a new row before the marked row.
Opens a sub menu for defining a set of list values to be automatically
entered in the ucor list, see
Opens a dialog to configure the settings for automatic filling of user
correction data with an R&S NRP power sensor, see
"Fill with Sensor", on page 218.
Deletes the marked row.
Allows you to delete any number of rows starting with the marked
row. The number of rows to be deleted can be defined in an entry
window.
Open the file menu to save the list under a new name.
Note: Save list only after filling both columns (frequency and level),
otherwise the entries are lost.
Each list is saved to the R&S SGT hard disk as a separate file with
the file prefix *.uco. The file name and the directory to which the file
is saved are user-selectable.
The list is saved under its current name.
Signal Generator Settings
Filling the Correction List
on page 421
on page 415
on page 416
RF Settings
Automatically).
Chapter 7.7.6.7,
215