R&S SGT100A User Manual page 511

®
R&S SGT100A
Example:
Usage:
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <Address>
Sets the GPIB address.
Parameters:
<Address>
Example:
:SYSTem:COMMunicate:NETWork:IPADdress <IpAddress>
Sets the IP address.
Parameters:
<IpAddress>
Example:
Manual operation:
:SYSTem:COMMunicate:NETWork:IPADdress:MODE <Mode>
Selects manual or automatic setting of the IP address.
Parameters:
<Mode>
Example:
Manual operation:
:SYSTem:COMMunicate:NETWork:MACaddress <MacAddress>
Queries the MAC address of the network adapter.
Parameters:
<MacAddress>
Example:
User Manual 1176.8674.02 ─ 07
SYSTem:COMMunicate:GPIB:RESource?
queries the VISA resource string.
Response: "GPIB::28::INSTR"'
Query only
integer
Range: 1 to 30
*RST: 28
SYSTem:COMMunicate:GPIB:SELF:ADDRess 28
sets GPIB address.
string
Range: 0.0.0.0. to ff.ff.ff.ff
SYSTem:COMMunicate:NETWork:IPADdress '7.8.9.10'
sets the IP address of the instrument.
See "IP Address" on page 258
AUTO | STATic
*RST: AUTO
SYSTem:COMMunicate:NETWork:IPADdress:MODE AUTO
the IP address is assigned automatically (DHCP)
See "Address Mode" on page 257
string
SYST:COMM:NETW:MAC
queries the MAC address.
Remote Control Commands
SYSTem Subsystem
480