R&S SGT100A User Manual page 391

®
R&S SGT100A
[:SOURce<hw>]:BB:ARBitrary:TRIGger:DELay:UNIT <TrigDelUnit>
Determines the units the trigger delay is expressed in.
Parameters:
<TrigDelUnit>
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:DELay <Delay>
The command specifies the trigger delay (expressed as a number of samples) for
external triggering.
Parameters:
<Delay>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:TDELay <ExtTimeDelay>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Parameters:
<ExtTimeDelay>
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal<1|2>]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelaySec> float
User Manual 1176.8674.02 ─ 07
SAMPle | TIME
*RST: SAMPle
See "External Delay Unit"
float
Range: 0 to depends on other values
Increment: 0.01
*RST: 0
Default unit: sample
BB:ARB:TRIG:SOUR EXT
selects an external trigger
BB:ARB:TRIG:DEL 200
sets a delay of 200 samples for the trigger.
See "Trigger Delay" on page 113
float
Range: 0 to 688
Increment: 1E-9
*RST: 0
Default unit: s
See "Trigger Delay" on page 113
Range: 0 to 688
Increment: 0.25E-9
*RST: 0
Remote Control Commands
SOURce Subsystem
on page 113
360