How To Activate Options - R&S SGT100A User Manual

®
R&S SGT100A
A folder opens, containing the share and the update folder.
5. Open the update folder and copy the new firmware update file in it.
The update starts automatically.
Unsuccessful or erroneous firmware update
An erroneous or unsuccessful installation of firmware update package is indicated by a
combination of one orange and red LEDs on the front panel.
Refer to the service manual for a description of the displayed error code or contact the
customer support center.

9.10 How to Activate Options

A firmware update before the activation of the SW option may be required.
Refer to the description of the SW option for the required firmware version.
See also
on page 272 for instruction on how to update the firmware version.
1. Select "SGMA-GUI main panel > Instrument Name > Setup > Install SW-Options".
2. Select "Option Key" and enter the key code delivered with the new option.
3. Restart the instrument.
The new option is now enabled and ready for operation.
User Manual 1176.8674.02 ─ 07
Chapter 9.9, "How to Install a New Firmware Version on the
Performing Configuration Tasks
How to Activate Options
Instrument",
275