Pulse Modulation Settings - R&S SGT100A User Manual

®
R&S SGT100A
Figure 7-28: Pulse generator - double pulse mode
1 = Pulse period
2 = Pulse width
3 = Double pulse width
4 = Double pulse delay
7.7.9.1

Pulse Modulation Settings

► To access the pulse modulation settings, select "SGMA-GUI > Instrument Name >
RF > Pulse Modulation".
The "Pulse Modulation" dialog contains all parameters required to configure pulse
modulation and pulse signal generation.
State
Activates pulse modulation.
The R&S SGMA-GUI indicates an activated pulse modulation as follows:
Remote command:
[:SOURce<hw>]:PULM:STATe
User Manual 1176.8674.02 ─ 07
on page 464
Signal Generator Settings
RF Settings
230