Marker Settings - R&S SGT100A User Manual

®
R&S SGT100A
Sequencing List
Open a dialog box for defining the "play lists" (see
ing" on page 91).
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect
Trigger Example
Displays an example of a multi segment waveform. The currently enabled trigger and
next segment mode are considered. After the instrument switch on, the graph of the
last loaded waveform is displayed.
Note: The curves plotted in this dialog box are textbook examples, "not measured"
waveforms. They are intended to visualize the trigger and next segment settings more
clearly.
Remote command:
n.a.
7.1.3.3

Marker Settings

► To access this dialog, select "SGMA-GUI > Instrument Name > Baseband > ARB >
Marker".
Provides the settings necessary to define the marker output signal for synchroniz-
ing external instruments and the delay of the marker signals on the USER 1/2 con-
nector.
User Manual 1176.8674.02 ─ 07
Signal Generator Settings
"Multi Segment Waveform Sequenc-
on page 400
Baseband
119