R&S SGT100A User Manual page 140

®
R&S SGT100A
I Value
Enters the value for the I component of the test signal.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:I
Q Value
Enters the value for the Q component of the test signal.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:Q
Generate Signal File
Generates a signal and saves it to a file.
The "File Select" window opens automatically and the signal can be stored as a wave-
form file.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate:NAMed
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate:NAMed
on page 366
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate:NAMed
Generate Signal RAM
Generates a signal and uses it as output straight away.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:CREate
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:CREate
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate
User Manual 1176.8674.02 ─ 07
Signal Generator Settings
Baseband
on page 366
on page 366
on page 366
on page 366
on page 366
on page 366
on page 366
109