Marker Settings - R&S SGT100A User Manual

Sgma vector rf source
Table of Contents

Advertisement

®
R&S
SGT100A
Parameters:
<Sequence>
Example:
Manual operation:
11.14.4.4

Marker Settings

The TRIGger:OUTPut subsystem contains the commands for setting the marker.
For option R&S SGT-K540, the ARB waveform for the envelope tracking (SOURce2)
uses the same marker settings as the first ARB waveform (SOURce1). Therefore these
commands are not defined for SOURce2.
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:MODE
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:OFFTime
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:ONTime
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:PATTern
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:PULSe:DIVider
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:PULSe:FREQuency?
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut:DELay:FIXed
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DELay
User Manual 1176.8674.02 ─ 07
AUTO | RETRigger | AAUTo | ARETrigger | SINGle
AUTO
The waveform is output continuously.
RETRigger
The waveform is output continuously. A trigger event (internal or
external) causes a restart.
AAUTo
The waveform is output only when a trigger event occurs. After
the trigger event the waveform is output continuously. Waveform
output is stopped with command
SOUR:BB:ARB:TRIG:ARM:EXEC and started again when a trig-
ger event occurs.
ARETrigger
The waveform is output only when a trigger event occurs. The
device automatically toggles to RETRIG mode. Every subse-
quent trigger event causes a restart. Waveform output is stop-
ped with command SOUR:BB:ARB:TRIG:ARM:EXEC and star-
ted again when a trigger event occurs.
SINGle
The waveform is output only when a trigger event occurs. After
the trigger event the waveform is output once to the set
sequence length (SOUR:BB:ARB:TRIG:SLEN). Every subse-
quent trigger event causes a restart.
*RST:
RETRigger
BB:ARB:SEQ AAUT
sets the "Armed_auto" trigger mode; the device waits for the first
trigger (e.g. with *TRG) and then generates the signal continu-
ously.
See
"Trigger Mode"
on page 110
Remote Control Commands
SOURce Subsystem
............................................. 363
......................................... 363
...........................................363
..........................................364
.................................364
........................ 364
...........................................365
............................................. 365
362

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents