R&S SGT100A User Manual page 65

®
R&S SGT100A
I , Q
SMA female type connectors that are inputs of the I/Q modulator, provided for feeding
of external signal.
NOTICE! Maximum input levels. Do not overload the I and Q inputs. The maximum
permissible voltage is 1V. For details, refer to the data sheet.
I, Q OUT
The I OUT/I BAR OUT and Q OUT/Q BAR OUT connectors are SMB male connectors
for direct output of the analog I/Q signal.
REF / LO IN, REF / LO OUT
SMA female type connectors, for reference or local oscillator signals, and alternatively
also in MIMO setups.
Reference input and output:
●
REF IN: Input for external reference signal.
●
REF OUT: Output of internal reference signal.
Local oscillator input and output:
●
LO IN: Input for external LO signals
●
LO OUT: Output of internal LO signals.
AC SUPPLY AND POWER SWITCH
The AC supply and power switch allow you to connect the R&S SGT to the power sup-
ply and switch on the instrument.
User Manual 1176.8674.02 ─ 07
Instrument Tour
Rear Panel Tour
34