R&S SGT100A User Manual page 459

®
R&S SGT100A
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:I <I>
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:Q <Q>
Specifies the amplifier bias of the respective I- or Q- component.
The maximum overall voltage depends on the I/Q output type.
See
Parameters:
<Q>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut:LEVel <Level>
Sets the off-load voltage of the analog I/Q signal output.
The value range and maximum overall voltage vary, depending on the I/Q output type.
See
Parameters:
<Level>
Example:
Manual operation:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:MODE <Mode>
Determines the mode for setting the output parameters.
Parameters:
<Mode>
Example:
User Manual 1176.8674.02 ─ 07
Table 7-4.
float
Range:
Increment: 0.002
*RST:
IQ:OUTP:BIAS:Q 0.1 V
See
Table 7-4.
float
Range:
Increment: 0.001
*RST:
:IQ:OUTP:TYPE DIFF
:IQ:OUTP:LEV 1.5 V
outputs the differential I/Q signal with 1.5 V power.
See
FIXed | VARiable
FIXed
locks the I/Q output settings
VARiable
unlocks the settings
*RST:
SOUR:IQ:OUTP:MODE VAR
SOUR:IQ:OUTP:ANAL:POW:LEV 2V
-3.6 to 3.6
0
"Bias (EMF)" on page 144
0.02 to 4
1
"I/Q Level Vp EMF" on page 144
FIXed
Remote Control Commands
SOURce Subsystem
428