Test Subsystem - R&S SGT100A User Manual

®
R&S SGT100A
Usage:
:SYSTem:MMEMory:PATH:USER?
Queries the user directory, that means the directory the instrument stores user files on.
Return values:
<PathUser>
Example:
Usage:

11.17 TEST Subsystem

The TEST system contains the commands for performing the routines as well as for
direct manipulation of the hardware assemblies (:TEST:DIRect).
The self tests return a "0" if the test is performed successfully, otherwise a value other
than "0" is returned. None of the commands of this system have an *RST value.
Improper use can destroy the assembly
The respective hardware assembly responds directly to the :TEST:DIRect command;
any safety mechanisms are bypassed. The command is intended for servicing purpo-
ses and should be used only by the Rohde & Schwarz service personnel.
:TEST:ALL:STARt
:TEST:ALL:RESult?
:TEST:KEYBoard[:STATe]
:TEST:BBIN?
:TEST:BB:CONNection?
:TEST:EIQMode
:TEST:ALL:STARt
Starts the selftest. Use the command
Usage:
:TEST:ALL:RESult?
Queries the result of the performed selftest. Start the selftest with :TEST:ALL:STARt.
User Manual 1176.8674.02 ─ 07
Query only
string
SYSTem:MMEMory:PATH:USER?
Response: "/var/user/"'
Query only
.......................................................................................................... 488
........................................................................................................488
.............................................................................................. 489
.................................................................................................................489
................................................................................................. 489
............................................................................................................ 489
Event
Remote Control Commands
:TEST:ALL:RESult?
TEST Subsystem
to query the result.
488