[:Source<Hw>]:Bb:arbitrary:mcarrier:carrier<Ch>:Power; [:Source<Hw>]:Bb:arbitrary:mcarrier:power:reference; [:Source<Hw>]:Bb:arbitrary:mcarrier:carrier<Ch>:State; [:Source<Hw>]:Bb:arbitrary:mcarrier:cfactor:mode - R&S SGT100A User Manual

®
R&S SGT100A
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:POWer <Power>
The command sets the gain of the selected carrier.
Parameters:
<Power>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:POWer:REFerence <Reference>
Defines the way the individual carriers in a composed multi carrier signal are leveled.
Parameters:
<Reference>
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:STATe <State>
Enables/disables the selected carrier.
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CFACtor:MODE <Mode>
The command sets the mode for optimizing the crest factor by calculating the carrier
phases.
User Manual 1176.8674.02 ─ 07
float
Range: -80 to 0
Increment: 0.01
*RST: 0
Default unit: dB
BB:ARB:MCAR:CARR15:POW -50 dB
sets the power of carrier 15 to -50 dB.
See " Gain " on page 104
RMS | PEAK
*RST: RMS
See "Power Reference"
0 | 1 | OFF | ON
*RST: 0
SOURce1:BB:ARBitrary:MCARrier:CARRier15:STATe
ON
See " State " on page 104
Remote Control Commands
SOURce Subsystem
on page 99
373