Sense, Read, Initiate And Slist Subsystems - R&S SGT100A User Manual

®
R&S SGT100A
Parameters:
<Configuration>
Manual operation:

11.13 SENSe, READ, INITiate and SLISt Subsystems

These subsystems contain the commands for configuring the power measurements
with R&S NRP power sensor connected to the R&S SGT.
The local state is set with the INIT command. Switching off the local state enhances
the measurement performance. Measurements results can be retrieved in local state
on or off.
Sensor parameters are set with the SENSe commands.
To start the measurement and retrieve the result, use the
command.
:INITiate<ch>[:POWer]:CONTinuous
:READ<ch>[:POWer]?
:SENSe<ch>:UNIT[:POWer]
:SENSe<ch>[:POWer]:APERture:DEFault:STATe
:SENSe<ch>[:POWer]:APERture:TIMe
:SENSe<ch>[:POWer]:CORRection:SPDevice:STATe
:SENSe<ch>[:POWer]:DISPlay:PERManent:PRIority
:SENSe<ch>[:POWer]:DISPlay:PERManent:STATe
:SENSe<ch>[:POWer]:FILTer:LENGth:AUTO?
:SENSe<ch>[:POWer]:FILTer:LENGth[:USER]
:SENSe<ch>[:POWer]:FILTer:NSRatio
:SENSe<ch>[:POWer]:FILTer:NSRatio:MTIMe
:SENSe<ch>[:POWer]:FILTer:SONCe
:SENSe<ch>[:POWer]:FILTer:TYPE
:SENSe<ch>[:POWer]:FREQuency
:SENSe<ch>[:POWer]:LOGGing:STATe
:SENSe<ch>[:POWer]:OFFSet
:SENSe<ch>[:POWer]:OFFSet:STATe
:SENSe<ch>[:POWer]:SNUMber?
:SENSe<ch>[:POWer]:SOURce
:SENSe<ch>[:POWer]:STATus[:DEVice]?
:SENSe<ch>[:POWer]:SVERsion?
:SENSe<ch>[:POWer]:TYPE?
User Manual 1176.8674.02 ─ 07
SENSe, READ, INITiate and SLISt Subsystems
STANdard | AFETracking
STANdard
Standard mode used for signal generation.
AFETracking
ARB foe Envelope Tracking: enables the usage of an extra
baseband for enabling the envelope tracking ARB generation.
*RST: STANdard
See "System Configuration"
................................................................................330
.................................................................................................... 330
............................................................................................331
.............................................................................331
..................................................................333
..................................................................333
.............................................................................333
..................................................................334
..............................................................................334
................................................................................ 335
..................................................................................335
...........................................................................336
........................................................................................ 336
............................................................................. 336
................................................................................... 336
.......................................................................................337
........................................................................ 337
...................................................................................337
......................................................................................... 338
Remote Control Commands
on page 77
:READ<ch>[:POWer]?
............................................................. 331
....................................................... 332
.........................................................332
.......................................................... 332
329