R&S SGT100A User Manual page 520

®
R&S SGT100A
Return values:
<Result>
Usage:
:TEST:KEYBoard[:STATe] <State>
Enable/disable keyboard and LED test state.
Parameters:
<State>
:TEST:BBIN?
This command performs a selftest on the baseband input hardware options. Several
analog diagnostics points are checked to verify the correct function of the module.
Return values:
<Bbin>
Example:
Usage:
:TEST:BB:CONNection?
Queries the state of the connection between connectors USER1 and USER2.
A 0=PASS response indicates that the connection is established, whereas a response
1=FAIL stands for a faulty connection.
Return values:
<Connection>
Usage:
Manual operation:
:TEST:EIQMode <EiqMode>
Triggers a connection test for testing the active external IQ devices.
Parameters:
<EiqMode>
User Manual 1176.8674.02 ─ 07
0 | 1 | RUNning | STOPped
*RST: STOPped
Query only
0 | 1 | OFF | ON
0 | 1 | OFF | ON
TEST:BBIN?
Response: "0" on success, "1" on fail
Query only
0 | 1 | PASS | FAIL
Query only
See "Execute Connection Test"
IQIN | IQOut
*RST: IQOut
Remote Control Commands
TEST Subsystem
on page 264
489