Default Settings And State - R&S SGT100A User Manual

®
R&S SGT100A
The menu can be used to create a multi-carrier waveform and save it under its own
name. As with normal waveforms, the file extension is *.wv. Information on clock rate,
number of samples and creation day is displayed in the File menu when a waveform is
loaded.

Default Settings and State

The upper part of the "General"dialog is used for calling the default settings and saving
and recalling existing ARB multi carrier submenu settings.
Set to Default
Calls default settings. The values are shown in the following table.
Parameter
Number of Carriers
Carrier Spacing
Crest Factor Mode
Signal Period Mode
User Manual 1176.8674.02 ─ 07
Signal Generator Settings
Value
1
0 MHz
Off
Longest file wins
Baseband
95