Table of Contents
Advertisement
VLAN C
OMMANDS
SHOW VLAN
show vlan
Overview
Use this command to display information about a particular VLAN by specifying its
VLAN ID. Selecting all will display information for all the VLANs configured.
show vlan
Syntax
{all|brief|dynamic|static|auto|static-ports|<1-4094>}
Parameter
<1-4094>
all
brief
dynamic
static
auto
static-ports
Mode
User Exec and Privileged Exec
Example
To display information about VLAN 2, use the command:
awplus#
Output
Figure 14-3: Example output from the show vlan command
VLAN ID
Name
======= ================ ======= ======= ====================================
2
VLAN0002
...
Related
vlan
Commands
C613-50103-01 REV A
Description
Display information about the VLAN specified by the VLAN ID.
Display information about all VLANs on the device.
Display information about all VLANs on the device.
Display information about all VLANs learned dynamically.
Display information about all statically configured VLANs.
Display information about all auto-configured VLANs.
Display static egress/forbidden ports.
show vlan 2
Type
State
Member ports
(u)-Untagged, (t)-Tagged
STATIC
ACTIVE
port1.0.3(u) port1.0.4(u) port1.0.5(u)
port1.0.6(u)
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
492
Advertisement
Table of Contents
