Ospfv3 For Ipv6 Commands; Introduction - Allied Telesis x510-28GTX Command Reference Manual

28

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
OSPFv3 for IPv6. See
information and examples.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B
OSPFv3 for IPv6
How to Configure Basic OSPFv3_Scenarios
"abr-type" on page 1078
"area authentication ipsec
"area default-cost (IPv6
"area encryption ipsec spi
"area range (IPv6 OSPF)" on page 1085
"area stub (IPv6 OSPF)" on page 1087
"area virtual-link (IPv6
"area virtual-link authentication ipsec
"area virtual-link encryption ipsec
"auto-cost reference bandwidth (IPv6
"bandwidth" on page 1097
"clear ipv6 ospf process" on page 1098
"debug ipv6 ospf events" on page 1099
"debug ipv6 ospf ifsm" on page 1100
"debug ipv6 ospf lsa" on page 1101
"debug ipv6 ospf nfsm" on page 1102
"debug ipv6 ospf packet" on page 1103
"debug ipv6 ospf route" on page 1104
"default-information originate" on page 1105
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Commands
spi" on page 1079
OSPF)" on page 1081
esp" on page 1082
OSPF)" on page 1088
spi" on page 1090
spi" on page 1092
OSPF)" on page 1095
for more
1075