Table of Contents
Advertisement
S
C
WITCHING
OMMANDS
-
SHOW INTERFACE ERR
DISABLED
show interface err-disabled
Overview
Use this command to show the ports which have been dynamically shut down by
protocols running on the device and the protocols responsible for the shutdown.
show interface [<interface-range> err-disabled]
Syntax
Mode
User Exec and Privileged Exec
Example
To show which protocols have shut down ports, use the commands:
awplus#
Output
Figure 13-2: Example output from show interface err-disabled
awplus#show interface err-disabled
Interface
port1.0.1
port1.0.2
C613-50103-01 REV A
Parameter
<interface-range>
err-disabled
show interface err-disabled
Reason
loop protection
loop protection
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Interface range
Brief summary of interfaces shut down by protocols
455
Advertisement
Table of Contents
