Table of Contents
Advertisement
S
C
WITCHING
OMMANDS
-
SHOW LOOP
PROTECTION
show loop-protection
Overview
Use this command to display the current loop protection setup for the device.
show loop-protection [interface <port-list>] [counters]
Syntax
Mode
User Exec and Privileged Exec
Usage
This command is used to display the current configuration and operation of the
Loop Protection feature
Examples
To display the current configuration status, use the command:
awplus#
Figure 13-4: Example output from the show loop-protection command
awplus#show loop-protection
LDF Interval:
LDF Rx Window:
Fast Block:
Disabled
Int
Enabled
--------------------------------------------------------------------------
port1.0.1
Yes
port1.0.2
Yes
port1.0.3
Yes
...
To display the counter information, use the command:
awplus#
Figure 13-5: Example output from the show loop-protection counters
C613-50103-01 REV A
Parameter
Description
interface
The interface selected for display.
<port-list>
A port, a port range, or an aggregated link.
counters
Displays counter information for loop protection.
show loop-protection
10
3
Action
Status
vlan-dis
Normal
vlan-dis
Normal
vlan-dis
Normal
show loop-protection counters
command
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Timeout
Timeout
Remain
7
-
7
-
7
-
Rx port
-
-
-
457
Advertisement
Table of Contents
