Subnet-Mask - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
SUBNET MASK

subnet-mask

Overview This command sets the subnet mask option for a DHCP address pool you are
configuring. Use this command to specify the client's subnet mask as defined in
RFC 950. This sets the subnet details using the pre-defined option 1. Note that if
you create a user-defined option 1 using the
override any settings created with this command. If you do not specify a subnet
mask using this command, then the pool's network mask (specified using the
next-server
The no variant of this command removes a subnet mask option from a DHCP pool.
The pool reverts to using the pool's network mask.
subnet-mask <mask>
Syntax
no subnet-mask
Mode DHCP Configuration
To set the subnet mask option to 255.255.255.0 for DHCP pool P2, use the
Examples
commands:
awplus#
awplus(config)#
awplus(dhcp-config)#
To remove the subnet mask option from DHCP pool P2, use the commands:
awplus#
awplus(config)#
awplus(dhcp-config)#
Related default-router
Commands
dns-server
domain-name
show ip dhcp pool
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
command) is applied.
Parameter
<mask>
configure terminal
ip dhcp pool P2
configure terminal
ip dhcp pool P2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
option
Description
Valid IPv4 subnet mask, in dotted decimal notation.
subnet-mask 255.255.255.0
no subnet-mask
command, then you will
2238