Table of Contents
Advertisement
D
H
C
YNAMIC
OST
ONFIGURATION
SHOW IP DHCP POOL
show ip dhcp pool
Overview
This command displays the configuration details and system usage of the DHCP
address pools configured on the device.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip dhcp pool [<address-pool>]
Mode
User Exec and Privileged Exec
Example
awplus#
Output
Figure 51-6: Example output from the show ip dhcp pool command
C613-50103-01 REV A
P
(DHCP) C
ROTOCOL
OMMANDS
Parameter
<address-pool>
show ip dhcp pool
Pool p1 :
network: 192.168.1.0/24
address ranges:
addr: 192.168.1.10 to 192.168.1.18
static host addresses:
addr: 192.168.1.12
lease <days:hours:minutes:seconds> <1:0:0:0>
subnet mask: 255.255.255.0 (pool's network mask)
Probe:
Status:
Enabled
Type:
ARP
Packets:
2
Timeout:
200 msecs
Dynamic addresses:
Total:
8
Leased:
2
Utilization:
25.0 %
Static host addresses:
Total:
1
Leased:
1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Name of a specific address pool. This displays the
configuration of the specified address pool only.
MAC addr: 1111.2222.3333
Default Values
[Enabled]
[Ping]
[5]
[200]
"Getting Started
Guide.
2230
Advertisement
Table of Contents
