Radius Commands; Introduction; Chapter 28: Radius Commands - Allied Telesis AlliedWare Plus AT-x230-10GP Command Reference Manual

28

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
the device to use RADIUS servers.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
976

RADIUS Commands

"deadtime (RADIUS server
"debug radius" on page 978
"ip radius source-interface" on page 979
"radius-server deadtime" on page 980
"radius-server host" on page 981
"radius-server key" on page 984
"radius-server retransmit" on page 985
"radius-server timeout" on page 987
"server (Server Group)" on page 989
"show debugging radius" on page 991
"show radius" on page 992
"show radius statistics" on page 994
"undebug radius" on page 995
Command Reference for x230 Series Edge Switches
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
group)" on page 977
C613-50055-01 REV A