Ipv6 Address Dhcp - Allied Telesis x310-26FT Command Reference Manual

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
6
IPV ADDRESS DHCP

ipv6 address dhcp

Overview Use this command in Interface Configuration mode to activate the DHCPv6 client
on the interface that you are configuring. This allows the interface to use the
DHCPv6 client to obtain its IPv6 configuration details from a DHCPv6 server on its
connected network.
Use the no variant of this command to stop the interface from obtaining IPv6
configuration details from a DHCPv6 server.
The DHCPv6 client supports the following IP configuration options:
•
•
•
•
•
ipv6 address dhcp
Syntax
no ipv6 address dhcp
Mode Interface Configuration for a VLAN interface or a local loopback interface.
To set the interface vlan10 to use DHCPv6 to obtain an IPv6 address, use the
Examples
commands:
awplus#
awplus(config)#
awplus(config)#
awplus(config-if)#
To stop the interface vlan10 from using DHCPv6 to obtain its IPv6 address, use
the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 address
Commands
Validation show running-config
Commands
C613-50103-01 REV A
Option 1 - the subnet mask for your device.
Option 3 - a list of default routers.
Option 6 - a list of DNS servers.
Option 15 - a domain name used to resolve host names.
Option 51 - lease expiration time.
configure terminal
interface vlan10
ipv6 enable
ipv6 address dhcp
configure terminal
interface vlan10
no ipv6 address dhcp
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2242