Table of Contents
Advertisement
DHCP
IP
6 (DHCP
6) C
FOR
V
V
OMMANDS
6
SHOW IPV
DHCP INTERFACE
show ipv6 dhcp interface
Overview
Use this command in User Exec or Privileged Exec mode to display DHCPv6
information for a specified interface, or all interfaces when entered without the
interface parameter.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 dhcp interface [<interface-name>]
Syntax
Mode
User Exec and Privileged Exec
Example
To display DHCPv6 information for all interfaces DHCPv6 is configured on, use the
command:
awplus#
Output
Figure 52-3: Example output from the show ipv6 dhcp interface command
Table 2: Parameters in the output of the show counter dhcp-client command
C613-50103-01 REV A
Parameter
<interface-name> Optional. Specify the name of the interface to show DHCPv6
show ipv6 dhcp interface
awplus# show ipv6 dhcp interface
vlan1 is in client mode
Address 1001::3c0:1
preferred lifetime 9000, valid lifetime 5000
starts
at 20 Jan 2012 09:21:35
expires at 20 Jan 2012 10:25:32
Parameter
<interface> is in
client mode
Address
Preference
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
information about. Omit this optional parameter to display
DHCPv6 information for all interfaces DHCPv6 is configured on.
Description
Displays that the specified interface is in client
mode.
Displays the address of the DHCPv6 server on the
interface.
Displays the preference value for the DHCPv6
server.
"Getting Started
Guide.
2246
Advertisement
Table of Contents
