Show Counter Dhcp-Server - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
SHOW COUNTER DHCP SERVER

show counter dhcp-server

Overview This command shows counters for the DHCP server on your device.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show counter dhcp-server
Mode User Exec and Privileged Exec
Example To display counters for the DHCP server on your device, use the command:
awplus#
Output Figure 51-3: Example output from the show counter dhcp-server command
Table 2: Parameters in the output of the show counter dhcp-server command
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
show counter dhcp-server
DHCP server counters
DHCPDISCOVER in
DHCPREQUEST in
DHCPDECLINE in
DHCPRELEASE in
DHCPINFORM in
DHCPOFFER out
DHCPACK out
DHCPNAK out
BOOTREQUEST in
BOOTREPLY out
Parameter Description
DHCPDISCOVER
The number of Discover messages received by the DHCP server.
in
DHCPREQUEST
The number of Request messages received by the DHCP server.
in
DHCPDECLINE
The number of Decline messages received by the DHCP server.
in
DHCPRELEASE
The number of Release messages received by the DHCP server.
in
DHCPINFORM in
The number of Inform messages received by the DHCP server.
DHCPOFFER out
The number of Offer messages sent by the DHCP server.
DHCPACK out
The number of Acknowledgement messages sent by the DHCP
server.
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
......... 20
......... 12
......... 1
......... 0
......... 0
......... 8
......... 4
......... 0
......... 0
......... 0
"Getting Started
Guide.
2225