Table of Contents
Advertisement
DHCP
IP
6 (DHCP
6) C
FOR
V
V
OMMANDS
6
SHOW IPV
DHCP
show ipv6 dhcp
Overview
Use this command in User Exec or Privileged Exec mode to show the DHCPv6
unique identifier (DUID) configured on your device.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ipv6 dhcp
Mode
User Exec and Privileged Exec
Usage
The DUID is based on the link-layer address for both DHCPv6 client and DHCPv6
server identifiers. The device uses the MAC address from the lowest interface
number for the DUID.
The DUID is used by a DHCPv6 client to obtain an IPv6 address from a DHCPv6
server. A DHCPv6 server compares the DUID with its database of DUIDs and sends
configuration data for an IPv6 address plus the preferred and valid lease time
values to a DHCPv6 client.
Example
To display the DUID configured on your device, use the command:
awplus#
Output
Figure 52-2: Example output from the show ipv6 dhcp command
Related
ipv6 address dhcp
Commands
C613-50103-01 REV A
show ipv6 dhcp
awplus#show ipv6 dhcp
DHCPv6 Server DUID: 0001000117ab6876001577f7ba23
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
2245
Advertisement
Table of Contents
