Ntp Authentication-Key - Allied Telesis x310-26FT Command Reference Manual

NTP C
OMMANDS
-
NTP AUTHENTICATION KEY

ntp authentication-key

Overview This command defines each of the authentication keys. Each key has a key number,
a type (MD5 or SHA1), and a value.
The no variant of this disables the authentication key.
Syntax ntp authentication-key <keynumber> {md5|sha1} <key> [trusted]
no ntp authentication-key <keynumber>
Mode Global Configuration
Examples To define an MD5 authentication key number 134343 and a key value "mystring",
use the commands:
awplus#
awplus(config)#
To disable the authentication key number 134343 with the key value "mystring",
use the commands:
awplus#
awplus(config)#
C613-50103-01 REV A
Parameter Description
<keynumber>
<1-4294967295> An identification number for the key.
md5
Define an MD5 key.
sha1
Define an SHA1 key.
<key>
The authentication key. For SHA1, this is a 20 hexadecimal character
string. For MD5, this is a string of up to 31 ASCII characters.
trusted
Add this key to the list of authentication keys that this server trusts.
configure terminal
ntp authentication-key 134343 md5 mystring
configure terminal
no ntp authentication-key 134343 md5 mystring
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2250