Show Ip Dhcp Server Summary - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION

SHOW IP DHCP SERVER SUMMARY

show ip dhcp server summary
Overview This command shows the current configuration of the DHCP server. This includes:
•
•
•
•
•
This show command does not include any configuration details of the address
pools. You can display these using the
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip dhcp server summary
Syntax
Mode User Exec and Privileged Exec
Example To display the current configuration of the DHCP server, use the command:
awplus#
Output Figure 51-10: Example output from the show ip dhcp server summary
Related ip dhcp leasequery enable
Commands
ip dhcp pool
service dhcp-server
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
whether the DHCP server is enabled
whether the DHCP server is configured to ignore BOOTP requests
whether the DHCP server is configured to support DHCP lease queries
the details of any user-defined options
a list of the names of all DHCP address pools currently configured
show ip dhcp server summary
command
DHCP Server service is disabled
BOOTP ignore is disabled
DHCP leasequery support is disabled
Pool list: p2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
show ip dhcp pool command.
Guide.
"Getting Started
2237