Show Ip Dhcp-Relay - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
SHOW IP DHCP RELAY

show ip dhcp-relay

Overview This command shows the configuration of the DHCP Relay Agent on each
interface.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip dhcp-relay [interface <interface-name>]
Mode User Exec and Privileged Exec
To display the DHCP Relay Agent's configuration on the interface vlan100, use
Example
the command:
awplus#
Output Figure 51-8: Example output from the show ip dhcp-relay command
Related ip dhcp-relay agent-option
Commands
ip dhcp-relay agent-option checking
ip dhcp-relay information policy
ip dhcp-relay maxhops
ip dhcp-relay server-address
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
Parameter
<interface-name> Name of a specific interface. This displays the DHCP
show ip dhcp-relay interface vlan100
DHCP Relay Service is enabled

vlan100 is up, line protocol is up
Maximum hop count is 10
Insertion of Relay Agent Option is disabled
Checking of Relay Agent Option is disabled
The Remote Id string for Relay Agent Option is 0000.cd28.074c
Relay information policy is to append new relay agent 
information
List of servers :
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
configuration for the specified interface only.
192.168.1.200
"Getting Started
Guide.
2234