Ntp Commands; Introduction - Allied Telesis x310-26FT Command Reference Manual

53

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
the Network Time Protocol (NTP). For more information, see the
Overview and Configuration
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A

NTP Commands

"ntp access-group" on page 2248
"ntp authenticate" on page 2249
"ntp authentication-key" on page 2250
"ntp broadcastdelay" on page 2251
"ntp discard" on page 2252
"ntp master" on page 2253
"ntp peer" on page 2254
"ntp restrict" on page 2256
"ntp server" on page 2258
"ntp source" on page 2260
"ntp trusted-key" on page 2262
"show counter ntp (deprecated)" on page 2263
"show ntp associations" on page 2264
"show ntp counters" on page 2266
"show ntp counters associations" on page 2268
"show ntp status" on page 2270
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Guide.
NTP Feature
"Getting Started
Guide.
2247