2 Installation and commissioning
2.3.10. Installation of cooling fan for motors, axes 1-3 (option)
Continued
Equipment
Additional cabling to and
inside the controller
Locking liquid
Standard toolkit
Circuit diagram
Other tools and procedures
may be required. See
references to these
procedures in the step-by-
step instructions below.
Plate for customer connections, at base
xx0500002301
A
B
80
Art. no.
-
-
-
-
Plate for customer connections
Attachment screws, 3 pcs, M6x16
Note
Specified in section
Position switch and
fan cables, robot base to controller
(option) on page
102.
Loctite. Used for the three tightening
screws.
The contents are defined in section
Standard toolkit on page
388, in part 2 of
the Product manual.
See chapter
Circuit diagram
Product manual, reference
These procedures include references to
the tools required.
Continues on next page
3HAC020993-001 Revision: G
in the
information.