Service Information System, M2000; Using The Sis System - ABB IRB 6650S - 200/3.0 Product Manual

3.7 Service Information System, M2000

3.7.1. Using the SIS system

General
This is a brief description of how to use the Service Information System, SIS for M2000 robot
systems. Details may be found in:
The section is only valid for M2000 systems. For information regarding M2004 robot
systems, see additional documentation, Operating manual - Service Information System:
Art. no. is specified in section
Basic procedure
3HAC020993-001 Revision: G
•
Service Information System, SIS
• Defining the SIS input parameters
•
Setting the SIS parameters
• Importing/exporting SIS data
•
Reading the SIS output logs
Action
1. Determine which of the system functions you
require.
2. Define what values are adequate and
suitable for your application in your
production environment.
3. Enter these parameters in the system.
4. Run the robot in normal operation.
5. Reset the counter if a repair is made, or if a
counter for any other reason is restarted.
6. When a time limit, set in the parameters, is
exceeded, a message may be read on the
Tech Pendant Unit (TPU).
7. If the log containing the message is to be
available from an external PC, or if the SIS
parameters are to be entered from an
external PC, a set of software tools are
available to build such an application.
ReferencesReferences on page
Reference
These are described in
Service Information System, SISDescrip-
tion of Service Information System (SIS)
on page
Recommendations on how to define
these are given in
parametersSIS system parameters on
page 192.
Maintenance intervals recommended by
ABB are specified in section
ScheduleMaintenance schedule on page
111.
How to do this is detailed in
SIS parametersSetting the SIS
parameters on page
The TPU displays for resetting any SIS
value are shown in
Information System, SISDescription of
Service Information System (SIS) on
page 190.
How to access this is detailed in
the SIS output logsReading the SIS
output logs on page
These are described in
exporting the SIS dataExporting the SIS
data on page
3 Maintenance
3.7.1. Using the SIS system
10.
Description,
190.
Defining the SIS input
Maintenance
Setting the
194.
Description, Service
Reading
196.
Importing/
198.
189