Field Service Ver. 1.0 Dec. 2008
15.2 Mechanical adjustment of the bypass tray section
15.2.1
Adjustment of the Bypass Paper Size Unit
This adjustment must be made in the following case:
• The Bypass Paper Size Unit has been removed.
[1]
[2]
[2]
[3]
[3]
4036fs3050c0
[1]
[3]
[2]
4036fs3051c0
15. Mechanical adjustment
1. Install the gear so that the protrusion
of the gear [1] and two marks [3] on
two Bypass Guide Rack Gears [2]
are aligned in a straight line.
2. Install the Bypass Unit Cover so that
part A (edge) [2] of the Rack Gear [1]
for the Bypass Paper Size Unit and
part B [3] of the Bypass Unit Cover
are aligned in a straight line.
229