Table of Contents
Advertisement
Section 3 - Configuration
Select Static IP if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address, and DNS address(es) provided to you by your ISP.
IP Address:
192.168.1.1 is the default WAN IP Address of
the DAP-1260L.
Subnet Mask:
255.255.255.0 is the default subnet mask.
All devices on the network must have the
same subnet mask to communicate on the
network.
Default Gateway:
Enter the IP Address of the gateway in your
network.
MTU Size:
You may need to change the MTU (Maximum
Transmission Unit) for optimal performance
with your specific ISP. The default MTU size
is 1500.
Primary DNS
Enter the Primary DNS (Domain Name
Server:
System) server IP address assigned by your
ISP.
Secondary DNS
Enter the Secondary DNS (optional) server IP address assigned by your ISP.
Server:
The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your PC's MAC Address
Clone MAC
button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not recommended that you change
Address:
the default MAC address unless required by your ISP.
D-Link DAP-1260L User Manual
Static IP
39
Advertisement
Table of Contents
