Figure 1-7 Trace Display In Single Enlarged Window In Trace Control - Keysight N1911A User Manual

34
33
Figure 1-7
Figure 1-7
information on the pulse and associated X and Y control.
33 This is the X and Y trace setup fields. Using the
34 The current settings of the X and Y scale are displayed in this reporting line.
35 This table shows 8 automatic time measurements performed on the first
Keysight N1911A/1912A User's Guide
Trace display in single enlarged window in trace control mode
shows a single enlarged window with the Trace Ctrl menu with
highlight the item and change its value.
complete captured pulse after the trigger. The 8 measurements are rise time
, fall time , time to positive occurrence
occurrence , pulse period
and pulse repetitive frequency 12.5 kHz.
35
or
, time to negative
, pulse width
Introduction
keys you can
, duty cycle 50.0 %
45
1