Hitachi Compute Blade 2000 User Manual page 1819

Enabling/disabling Syslog transfer

Enable or disable Syslog transfer. To send Audit events with Syslog transfer,
enable it.
Sending or not sending Audit events (only for management modules)

Enable or disable Syslog transfer whether or not to send Audit events. To
send them using Syslog transfer, enable it.
Syslog server for destination

Set an IP address or host name for the syslog server for destination. Use
FQDN to set the host name.
The port number used for Syslog transfer cannot

be changed.
Only one syslog server can be specified as

destination.
3. Sending Syslog transfer test message
When you log into the management module system console or system Web
console, "Logged in to the System Console." or "Logged in to the System Web
Console." is sent. For BMC, "Requested a Send syslog transfer test message."
is sent when you log into the server blade Web console and send the Syslog
transfer test message on the Syslog transfer screen. Check if the message is
sent or not. When the message is sent, Syslog transfer setting is correct.
1768