Show Hardware Vlan-Counters; Tcpdump - Dell Z9500 Reference Manual

c0003ffc
Stage
--More--

show hardware vlan-counters

Display the hardware VLAN statistics.
Syntax
show hardware vlan-counters vlan-id
Parameters
vlan-id
Defaults None
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.7(0.0)
Example
Dell#show hardware vlan-counters 1
Counters for vlanid: 1
------------------------
Total number of inpackets:
Total number of inbytes:
Total number of outpackets: 0
Total number of outbytes:
Dell#
Related
clear hardware system-flow
Commands
components.

tcpdump

Enable a TCP dump for CPU-bound traffic on the Control and Router Processors..
Z9500
Syntax
tcpdump {cp | rp} [capture-duration time | filter expression |
max-file-count value | packet-count value | snap-length value |
write-to path]
To disable the TCP dump, use the no tcpdump command.
Debugging and Diagnostics
Enter the interface VLAN number. The range is from 1 to
4094.
EXEC
EXEC Privilege
Description
Introduced on the S6000-ON.
Introduced this command.
0
0
0
— clears the statistics from selected hardware
669