Dot1X Reauth-Max - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

dot1x reauth-max

Configure the maximum number of times a port can reauthenticate before the port becomes

unauthorized.

dot1x reauth-max number

To return to the default, use the no dot1x reauth-max command.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the E-Series.

Enter the permitted number of reauthentications. The range

is from 1 to 10. The default is 2.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Introduced on the C-Series and S-Series.

Introduced on the E-Series.