Dot1X Max-Eap-Req - Dell Z9500 Command Reference Manual

dot1x max-eap-req

Configure the maximum number of times an extensive authentication protocol (EAP) request is
transmitted before the session times out.
Z9500
Syntax
dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
number
Defaults 2
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.4.1.0
dot1x max-supplicants
Restrict the number of supplicants that can be authenticated and permitted to access the network
through the port. This configuration is only takes effect in Multi-Auth mode.
Z9500
Syntax
dot1x max-supplicants number
802.1X
Enter the number of times an EAP request is transmitted
before a session time-out. The range is from 1 to 10. The
default is 2.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
201