Setting The Authentication Login Method; Security Configuration Command Set - Enterasys N Standalone (NSA) Series Configuration Manual

14.3 SECURITY CONFIGURATION COMMAND SET

14.3.1 Setting the Authentication Login Method

Purpose
To configure the authentication login method.
Commands
The commands used to configure the authentication login method are listed below and described in
the associated section as shown:
•
show authentication login
•
set authentication login
•
clear authentication login
(Section 14.3.1.1)
(Section 14.3.1.2)
(Section 14.3.1.3)
Security Configuration Command Set
Setting the Authentication Login Method
Matrix NSA Series Configuration Guide 14-5