HORN
INSPECTION
Disconnect the wire connectors from the horn.
Connect the 12V battery to the horn terminal
directly and check the horn sound.
REMOVAL/INSTALLATION
Disconnect the wire connectors from the horn.
Remove the nut and horn.
Installation is in the reverse order of removal.
TURN SIGNAL RELAY
INSPECTION
1. Related Circuit Inspection
Check the following:
- burned bulb or non-specified wattage
-
blown fuse
-
ignition switch and turn signal switch func-
tion
- loose connectors
Check for the above items.
Are the above
YES
NO
items
in good condition?
- GO TO STEP 2.
- Replace
or
repair
the
part(s)
LIGHTS/METER/SWITCHES
malfunction
20-25